Output for one layer painting
up to 10 m²/l


available capacities: 5 l, 10 l

Product is friendly
to people with allergies.


Dispersive paint for walls and ceilings.


HETTA AKRYL LX is a latex paint for the decorative and protective painting of walls and ceilings made of cement, cement-limestone and gypsum mortars as well as plasterboard walls inside buildings.

Application parameters
– easy to apply,
– good adherence to the substrate,
– efficient and well covering,
– the good resistance of the layer against cleaning,
– works perfectly with colours,
– ensures appropriate “breathing” of walls.


1. Substrate preparation
The surface for painting should be: dry, clean, dusted and without cracks. Any remains of the glue paints should be carefully removed and the substrate cleaned with water. Surfaces with dispersive paints and poorly adherent substrate should be removed and other cleaned with water with some cleaning agent. Cleaned coatings of the old paints should be appropriately dried. Fresh, dried plasters and substrates that are very water-absorbent, as well as substrates never painted before, should be grounded with HETTA GRUNT W. Places with fungi, covered with moulds should be cleaned mechanically and disinfected with fungicide, remembering about removing the source contamination. Cracks and uneven surfaces should be repaired with painter’s putty; well ground after setting.

2. Painting
Paint should be mixed well. Recommended number of layers 1-2, although the second layer should be applied after around 4 hours of applying the first one.
After finishing the works, painting tools should be carefully cleaned using water.

3. Temperature
Painting works should be conducted at ambient temperature, but not lower than +10°C and not higher than +30°C.

4. Output
Output for one layer painting is up to 10 m²/l.

Product has PZH attestation.